The Demon Evo also monitors the battery voltage, triggering the alarm if the voltage rises suddenly indicating the engine has been started and also provides visual notification of a low battery by reducing the flash rate of the deterrent LED.
In addition to adjustable movement sensitivity, the Demon Evo can also feature:
Transport Mode: Ability to arm without movement sensing if the bike or scooter is being transported.
Alarm Diagnostics: If the alarm has triggered whilst you were away, the Demon Evo will bleep a code to tell you which input caused the trigger.
Panic Mode: The ability to trigger the alarm from the remote control
Automatic Rearm: With this optional feature enabled, the Demon Evo will rearm automatically if the alarm is disarmed and the engine isn’t started within 30 seconds.
Arm/Disarm Tones: Another optional feature, the Demon Evo can be programmed to ‘chirp’ on arm and disarm and there are 2 options on the ‘chirp’ volume.
Note: Certain countries including the UK require alarms to arm/disarm silently, check legislation for your country.
Optional Seat Switch / Luggage Loop: Separate trigger wire which can be used in conjunction with a magnetic seat switch or inline connector to extend the level of protection.
The Datatool Demon Evo is supplied prewired with an inline fuse and terminals ready to connect direct to the vehicle battery and the LED is a plug-in connection meaning no soldering is required to install. In addition to the deterrent effect of the LED, the Demon Evo is also supplied with a ‘Protected by Datatool’ decal to highlight to potential thieves that security is installed.